Apple skin, citrus skin, wheat bran, corn skin, bean skin, rice bran, beet slag, sugar canesets, etc. The absorption effect should also be greatly reduced, and after the processing is treated with gas flow, it can significantly improve the eating taste and absorption.
Airflow pulverizer is a high-tech in powder processing, providing a new solution for ultrafine pulverization and grading. Airflow pulverizer is often used in rare, valuable, high value-added powder raw materials, which generally process fineness in microscale (3-54 microns), can also adjust the particle size arbitrarily, once become general purpose battery positive material industry equipment.
Airflow pulverizer as common mechanical equipment in modern industrial production, like other equipment, also has a correct way of use, and maintenance methods. After all, large-scale mechanical equipment has always existed some security hazards. Only security accidents can only be avoided as required, and Xiaobian summarizes 14 precautions on the operation of the airflow pulverizer. As long as this is 14 points, it is believed that the safety problem of the airflow crusher will be easily resolved.
1. Operators should read this instruction manual, familiarize with the performance, structure and use of this machine, and install debugging, use and maintenance according to the provisions of this specification.
2, must be strictly selected by the spindle speed of the spindle speed of various models, warning: It is strictly forbidden to improve the speed of the spindle.
3, the crushed material should remove hard objects such as mixed wires and stones. Note: The feeding machine should be prevented, otherwise damage to the sieve, hammer and other parts.
4, when the operator feeds, it should stand on the side of the feeding port, warning: It is forbidden to use iron bars, wooden rods, and do not allow the hand to extend into the warning line of the feeding port, sometimes the material is large The material can be pushed into the crushing chamber of the mill with a harder crop straw.
5, when working, pay attention to the bearing temperature cannot exceed 55 ° C, if there is overheating phenomenon, stop checking immediately, so as not to burn bad bearings, spindles, etc.
6, should clean up the materials in the assembly bag in time, otherwise it will affect the production efficiency.
7. Adjusting the chassis, hammers or triangle, should open the blockage of the casing to clean the crushing room, pay attention: The power must be disconnected to ensure safety.
8. When the open operation is completed, it must be cleaned up in the machine group, and the components such as anti-screening shall be rusty and must be waterproof.
9. Non-16-year-old teenagers and more than 55-year-old people and those who don't know this machine operation cannot work separately.
10, should avoid using a fake hammer, preventing the vibration caused by the imbalance of the rotor damage to the machine's service life, in order to extend the service life of the whole machine. Be sure to use the various parts produced by our factory.
11. If the airflow pulverizer is working, if there is a fault, the power is turned off, and after the machine stops running, it will be maintained, warned: When the machine is running, the body should be locked, it is strictly forbidden to open.
12. After the wine is strictly forbidden, the disease is ill, and the fatigue is working separately.
13. The machine should be equipped with a belt guard to prevent human safety.
14. When the airflow crusher checks whether the components are fastened, after the operation is completed, clean up and check, the machine works for 200 hours, and should check the wear of rotor, hammer, blade dish or blades, pay attention: If the pin, hammer or open portraits are found to be crack and abnormal wear, it should be replaced immediately to avoid serious damage to the machine and personal injury and death.
The above 14 points is that Shandong Erpai Xiaobian is a precautions for the operating precautions for everyone. Do you have any gains? Shandong Erpa is a large-scale manufacturer specializing in the production of gas flow crushers, airflow grading machines, and mechanical impact grind. The company provides free incoming experiments and testing to provide ZUI security for users. Quality Miles are ALPA Powder Technology to give back to the country 's thousands of customers to have a groundbreaking activity that is favored by AlPA brands. For many years, AlPa Powder Technology adheres to the "service value-added, shared value" commitment, leaping thousands of mountains, walking through the motherland, north, north, unhappy, only for the first line of customers, communicating with customers, and establishing long-term cooperative relations with customers . The event not only improved the customer satisfaction of the ALPA brand, but also consolidated the status of airflow crusher products produced in Alpa production in the national market.